NIS-Elements shows an error: Camera DriverDeconvolution processing not giving expected results... This usually happens when NIS-Elements does not find the camera. It is usually because the camera is not powered on.the image files do not contain the correct metadata. - Make sure to save the files with all available metadata on the microscope used for the acquisition.
This usually requires to save the files in the software propriatery format (.nd for NIS-Elements and Metamorph, .czi for Zen,...) - You can always add the correct calibration values after acquisition (pixel size in XY and Z, wavelength, Z-step)
- Turn off NIS-Elements
- Turn on the camera (the microscope power bar and the camera switch on the top of the camera)
- Check the USB conexion between the camera and the computer
- Turn on NIS-Elements
|