Historique de la page

{bgcolor:#F9FBFE}{color:#800000}{*}Local 3121{*}{color}

{color:#000080}{*}Usagers :*{color}



{color:#000080}{*}Responsable:*{color}

{color:#800000}{*}Khalid Laaziri (khalid.laaziri@umontreal.ca).*{color}
{color:#800000}{*}Joel Bouchard (joel.bouchard@polymtl.ca).*{color}

h3.


h3. {color:#003366}{*}Description{*}{color}
----
Boîte à gants (GLOVEBOX) MBRAUN modèle MB-200, équipée d'une tournette (Spincoater), d'un évaporateur, et d'une station à pointes.


[System Pictures|^MBRAUN System_Pictures_06-043.pdf]

[Guide d'utilisation et des réglements|^BOÎTE À GANTS - GUIDE D'UTILISATION.pdf]

[^MBRAUN MB-200 SN_06-043.pdf]


h3. {color:#003366}{*}Procédures{*}{color}
----
h4. {color:#800000}Transfert d'échantillons{color}
{panel}

h3. {color:#000080}{*}Small Antechamber{*}{color}

{color:#222222}The smaller antechamber is operated manually:{color}{color:#222222} {color}
* {color:#222222}Fill slowly Antechamber With Nitrogen (Turn Slowly The Valve Knob From{color} {color:#800000}{*}EVACUATE{*}{color} {color:#222222}To{color} {color:#800000}{*}REFILL{*}{color}{color:#222222}).{color}
* {color:#222222}Place Your Material Into Antechamber.{color}

* Cycle *EVACUATE/REFILL* 3 Times (At least      10 min per cycle). Depending on what is being moved into Glovebox, different levels of precaution are required when evacuating and refilling the antechamber.
** {color:#800000}{*}POWDERS{*}{color}*:* Gently evacuate and refill the chamber to avoid losing fine or fluffy powders.
** {color:#800000}{*}LIQUIDS:*{color}\* *If packed under vacuum, or packed under a dry gas such as Nitrogen, can be moved in the glovebox As Is. If packed under air, when bringing bottled chemicals; First loosen the cap and remove th etape, then evacuate the antechamber as soon as they are in the Glovebox, thighten the cap.
** {color:#800000}{*}LIGHT FLYABLE MATERIALS{*}{color}*:* should be clipped during the transfer in the antechamber.
** {color:#800000}{*}ALL METAL TOOLS AND GLASSWARES{*}{color} should be heated in an oven prior to enter the Glovebox in order to remove all the adsorbed moisture. Put them in th eantechamber while they are still warm.

** {color:#800000}{*}POROUS MATERIALS{*}{color} (Weight paper, Kimwipes, etc.) Should be evacuated for extended periods of time (Overnight to a day in the main antechamber).

* Once materials has been cycled appropriately, fill antechamber with Nitrogen then isolate antechambers from glovebox (Close position for the small antechamber).
* Wear left hand glove and stick your hand in the glovebox; Open the antechamber door by rotating the lid; unload your material, then close the door.
*  With the right hand turn the valve knob to evacuate so that the antechamber stays under vacuum,. 

*POROUS MATERIALS*

h3. {color:#222222}#000080}{*}Main Antechamber{*}Après le démarrage, le système de positionnement va commencer le processus d'initialisation (les moteurs X,Y, Z du plateau vont bouger à la position 0 "home").*{color}
* {color:#222222}{*}Allumer le contrôleur de distribution des liquides "Dispensing Control Unit" (3).*{color}
* {color:#222222}{*}Ouvrir le programme "Autodrop" à partir de l'ordinateur.*{color}}{color}

HANDMODE OPERATION: THE ANTECHAMBER EVACUATION AND REFILLING ARE STARTED MANUALLY FROM THE PANEL SCREEN.

AUTOMATIC CONTROL: THE EVACUATION AND REFILLING CYCLES ARE COMPLETELY AUTOMATIC. THAT'S THE DEFAULT MODE.
* PLACE YOUR MATERIAL      INTO ANTECHAMBER.
* MAKE SURE THE AUTOMATIC      MODE IS SELECTED FOR THE EVACUATE/REFILL.
* PRESS EVACUATE/START      AUTOM BUTTON TO START THE CYCLE (THE BUTTON WILL TURN FROM RED TO GREEN      ONCE THE PROCESS IS FINISHED)
* DEPENDING ON WHAT IS      BEING MOVED INTO GLOVEBOX, DIFFERENT LEVELS OF PRECAUTION ARE REQUIRED      WHEN EVACUATING AND REFILLING THE ANTECHAMBER

* *POWDERS{*}*:* GENTLY EVACUATE AND REFILL THE CHAMBER TO AVOID LOSING FINE OR FLUFFY POWDERS.
* *LIQUIDS{*}*,* IF PACKED UNDER VACUUM, OR PACKED UNDER A DRY GAS SUCH AS NITROGEN, CAN BE MOVED IN THE GLOVEBOX AS IS. IF PACKDED UNDER AIR, WHEN BRINGING BOTTLED CHEMICALS, FIRST LOOSEN THE CAP AND REMOVE THE TAPE. THEN EVACUATE THEM IN THE ANTECHAMBER. AS SOON AS THEY ARE IN THE GLOVEBOX, TIGHTEN THE CAP.
* *LIGHT FLYABLE MATERIALS* SHOULD BE CLIPPED DURING THE TRANSFER IN THE ANTECHAMBER.
* *ALL METAL TOOLS AND GLASSWARES* SHOULD BE HEATED IN AN OVEN PRIOR TO ENTER THE GLOVEBOX IN ORDER TO REMOVE ALL THE ADSORBED MOISTURE. PUT THEM IN THE ANTECHAMBER WHILE THEY ARE STILL WARM.
* *POROUS MATERIALS* (WEIGHT PAPER, KIMWIPES, etc.) SHOULD BE EVACUATED FOR EXTENDED PERIODS OF TIME (OVERNIGHT TO DAYS IN ETHE MAIN ANTECHAMBER).

* WEAR LEFT HAND GLOVE      AND STICK YOUR HAND IN THE GLOVE BOX; OPEN THE ANTECHAMBER DOOR BY      ROTATING THE LID; UNLOAD YOUR MATERIAL, THEN CLOSE THE DOOR.

*ALWAYS MAKE SURE THAT ANTECHAMBER HAS BEEN EVACUATED FOR AT LEAST 15 MINUTES BEFORE YOU REFILL.*


{panel}

h4. {color:#800000}{*}Fermeture{*}{color}
{panel}
{color:#222222}{*}La procédure de fermeture du système se fait selon les étapes suivantes:*{color}
* {color:#222222}{*}Fermer le programme "Autodrop".*{color}
* {color:#222222}{*}Éteindre le DCU et le PCU.*{color}
{panel}

h4. Drawings
----
|| !MBRAUN DRAWING  0001.jpg|thumbnail! || !MBRAUN DRAWING 0002.jpg|thumbnail! ||



h4. Maintenance
----
[Calendrier de maintenance|^MBRAUN Calendrier de maintenance.pdf]

[Procèdures de maintenance|^GLOVEBOX MB200 - PROCÉDURES DE MAINTENANCE.pdf]

[H2O probe Maintenance|^H2O probe Maintenance.pdf]


h4. Spare parts
----
| FC-04 | Activated Carbon |
| FC-02 | Molecular Sieve |
| FC-01 | Copper Catalyst |
| OR-07 | Glove O-ring |
| GL-06 | 8B1532 A 9.75 Butyl Gloves |



h4.


h4. Documentation
----
h5. Custom system documentation

[System Wire Diagram|^Custom Wire Diagram Project #06-043.pdf]

[Analyzer Pinout Diagram|^Analyzer Pinout Diagram.pdf]

[MBRAUN MB-200 SN 06-043 System information|^MBRAUN MB-200 SN_06-043.pdf]



h5.



h5. Glovebox Material Safety Data Sheets

[Activated Carbon|^Activated_Carbon_01.2004_msds.pdf]

[Molecular Sieve|^Molecular_Sieve_13X_01.2004_msds.pdf]

[Catalyst|^R311_Catalyst_06.2004_msds.pdf]

----
[brano:Laboratoires]
{bgcolor}